Sony DVS-7250, Операционное программное обеспечение

Страница: 467 / 542

Chapter 14 Setup
14-59
Functions assignable to the programmable buttons (Continued)
AUX BLANK:
Unlabeled button to
the right of the P/P
UTIL button (above
the shift button) in the
auxiliary bus bank
(see page 2-24)
NO ASSIGN: No function allocated. (Factory default
setting)
AUX OR EXT: When you press the button, turning it on,
the auxiliary bus bank control switches to the routing
switcher.
AUX14-28: Pressing this button, turning it on, displays
AUX 14 to AUX 28 in the auxiliary bus bank, and
enables cross-point switching.
Operation when “AUX OR EXT” is selected
To switch the 16 destinations of a routing switcher
which can be controlled from the DVS-7250 switcher
system, use the 16 delegation buttons (AUX1 to
AUX13, EDIT PVW, FRAME MEM 1, and FRAME MEM
2) in the auxiliary bus bank.
For source switching, use the cross-point buttons. The
button (button number 0) at the left end of the cross-
point button row corresponds to source 1 controlled
from the switcher, and using the shift function a
maximum of 59 sources can be switched.
ORTHG: ORTHG
button in the DME
control section
ORTHG: The trackball functions as a positioner only in
the one of the X- and Y-directions in which it is moved
more. (Factory default setting)
VTR: The DME control section functions as a VTR tape
transport controller.
ALL: ALL button in the
numeric keypad
section
Specify one of the 12 sub-register selection buttons as
the button to be selected when the ALL button is
pressed.
Programmable button Functions available for allocation
TR TYPE NAM &
SUPER MIX: NAM
and SUPER MIX
buttons in the
transition control
section of each M/E
bank
NAM & SUPER MIX: select NAM and SUPER MIX as
the respective transition types. (Factory default
setting)
KEY1, KEY2 ON: assign the same functions as the
KEY1 ON and KEY2 ON buttons in the M/E key
control section.
KEY1, KEY2 MIX: assign the same functions as the
KEY1 MIX and KEY2 MIX buttons in the M/E key
control section.