Chapter 1
Overview
1-4
Chapter 1
Overview
Accessories
See page A-4 for the accessories supplied with the
DMW-S01NL/S02NL/S01SPK/S02SPK.
Refer to the attached list of accessories for the
accessessories supplied with the DMW-S05NL.
1-2-2
Control Panels
Four Control Panels are provided to facilitate XPRI
editing system operations, as described below. You
can select the panels you need and position them as
required.
DMW-C1 Media Bar Control Panel
This panel has eight knobs and two buttons. You can
use them to adjust parameters for material color
correction, equalizing, compositing, and so on.
This unit is used by connecting it to the Jog & Shuttle
Control Panel or the Audio Control Panel.
DMW-C2 Jog & Shuttle Control Panel
This panel is used to control VTRs and make editing
operations. It has function buttons and a search dial.
This panel is connected to the Digital Media
Workstation or to the Audio Control Panel using the
supplied USB cable. It is powered by the supplied AC
adaptor.
Accessories
USB cable (1)
Palm rest (1)
AC adaptor (1)
DMW-C3 Audio Control Panel
This panel provides audio faders. It has eight faders for
audio tracks and one master fader. It also has a mute
button, function buttons, a headphones audio level
control knob, and monitor setting buttons.
This panel is connected to the Digital Media
Workstation or to the Jog & Shuttle Control Panel by
using the supplied USB cable. When monitoring audio
with headphones, the cable with RCA phono plugs is
used to connect this panel to the AV I/O Block. The
Audio Control Panel is powered by the supplied AC
adaptor.
Accessories
USB cable (1)
AC adaptor (1)
DMW-C4 Trackball Control Panel
This panel is used in keyframe operations for 3D
effects. It has a trackball and Z ring, and six function
buttons.
This panel is used by connecting it to the Jog & Shuttle
Control Panel or the Audio Control Panel.
Accessories
Palm rest (1)
1-2-3
Storage
DMW-ST001 Fibre Channel Storage Unit
This unit contains ten 3.5-inch hard disk drives. It has
two fibre channel connection ports, one for connection
to the Digital Media Workstation and one for
connection to another Fibre Channel Storage Unit.
Both ports enable high-speed 100 MB/s data transfer.
Up to 12 Fibre Channel Storage Units can be
connected to the Digital Media Workstation (up to 6
through one fibre channel connection port and up to 6
through the other).
1-2
Product Configuration
