42
d:series
amplifi
ers
manual
remote control
control tabs
To edit a channel, click on the desired channel strip in the dsp overview tab.
All functions are switched on by standard and can be bypassed by a click on the green bar on top of the
desired section.
6.3.3 - dsp channel menu
1
2
3
4
5
header sections
reset-button: resets all channel parameters
channel navigation: displays the selected
channel including arrows for navigation
back-button: to go back to the dsp overview
tab
general section
mute-button: on/off
invert-button: on/off
gain: enter values from -24 dB to +20 dB
delay-button: on/off
delay time: enter values from 0 to 11.5 ms
crossover section
on/off-button: turn low- or high-cut on or off
Frequency:
20-20.000 Hz
Type:
bw (Butterworth),
lr (Linkwitz-Riley), bes (Bessel)
Order:
1: -6 dB per octave
2: -12 dB per octave
3: -18 dB per octave
4: -24 dB per octave
equalizer section
Filter types:
low shelf, high shelf,
parametric, low cut, high cut
Frequencies: 20-20.000Hz
Gain:
+24dB to -24dB
Quality factor: 0.1-10
dynamics section
(split in compressor and limiter)
Compressor
Threshold: 0-90.0
Ratio:
1:1-1:100
Knee:
hard/soft
Attack:
1-1.000 dB/s
Hold:
0-2.000 ms
Limiter
Threshold: 0-90.0
Knee:
hard/soft
Hold:
0-2.000 ms
Decay:
1-1.000 dB/s
1
4
2
5
3
Editing numeric values
There are two ways to edit numeric values such as gain, frequency, delay, threshold etc.
1.
By a mouse-click in the desired fi eld and through entering the value via keyboard.
2.
When moving the mouse cursor over the input fi eld a bidirectional arrow appears. Edit the value
by dragging and moving on the y-axis
