manualshive.com logo in svg

sonible d Series, Руководство пользователя

Поделиться
Скачать
sonible d Series Скачать руководство пользователя страница 38

38

d:series amplifiers

manual

remote control

6 - remote control

The remote control provides you with various control functions via web browser in an established network 
as described in chapter 5.4.

Functions as routing and dsp screen are only available for d:series amplifiers provided with the corre-
sponding module – routing with optional digital input card, dsp with optional dsp module.

To access all available control functions via web browser you have to establish a valid network connection. 
The web interface can be accessed from any device connected to the same network by entering the IP 
address of the amplifier into the address bar of your web browser.

The network connection has to be configured via the network menu on the control surface (touch screen). 
A detailed description can be found in chapter 5.4.
 

NOTE: Your browser needs to support HTML5 and correspond to the current state.
The web interface is optimized for remote control via laptop and desktop computers. sonible can’t 
guarantee the impeccable functionality via mobile devices as tablets and smartphones.

1

2

3

4

5

6

Options 

global mute, stealth mode, fan modes

These settings are described in chapter 5.6 
‘stealth screen’.

Meter display 

incl. input selection in group of eight

You are able to switch between analog 
and digital inputs (when digital input card 
is equipped) by a mouse click on the button 
above the meter display.

System status display 

overall amp health, temperature control, fan 
speeds

Shutdown button

Control tabs 

(routing, dsp, system stats)

Menu corresponding to the control tabs

1

3

2

4

5

6

6.1 - establishing a network connection

Содержание d Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды