40
d:series amplifiers
manual
remote control
control tabs
Parameter section
In this section you are able to edit parameters for a selected channel:
•
gain: +/- (attenuation; no positive gain possible)
•
interval: increment of the ‘+/-’ buttons (0.5, 1, 3, 6)
•
channel mute
•
sequential routing
•
phase invert
•
clear routing-button: deletes all routing settings of all channels
Note: all routed channels and all edited parameters will be cleared!
•
single/all/row/col-buttons:
single: to patch individual channels by a double-click in the routing matrix
all: to patch each channel input to each channel output by a double-click in the routing matrix
row: to patch channels in a row by a double-click in the routing matrix
col: to patch channels in a col by a double-click in the routing matrix
3
Individual routing
To route individual channels select the ‘single’-button in the parameter section on the right and route the
desired channel by a double-click with the mouse in the routing matrix.
By a single-click on a routed channel, the gray overlaid side menu (‘parameter section’) is activated to edit
various parameters.
Sequential routing
To the left of the phase invert-button in the side menu you can find the ‘sequential routing’-button. The
button allows you to assign a 1:1 routing for the ensuing channels in the corresponding section.
All edited parameters such as phase inversion, gain reduction and the mute state will be copied to
the ensuing channels as well.
In the following example the input of input channel 10 is routed to output channel 7. By a click on the
‘sequential routing’-button the ensuing channels are routed 1:1, the gain trim of ‘-4’ and the phase
inversion is copied as well.
Matrix mixer
– Summing of Dante input channels
For d:series amplifiers with Dante input card and firmware versions higher than 3.0
sonible
provides the
feature to sum multiple Dante input channels to multiple output channels.*
The matrix mixer allows to route more than one input channel to outputs. Via the gain value settings of
each of the summed input channels you are able to balance the weight of the selected input signal related
to the summed output signal. Based on the availability of this feature you can use additional routing
buttons as all, col and row to route more than one channel per mouse-click.
*) Amplifiers with Dante input card ordered before 12/2019 have to be updated by sonible to establish the
availability of the matrix mixer.
