36
d:series amplifiers
manual
control surface
dsp dynamics menu
5.5.4 - dsp dynamics menu
5.5.5 - copy/paste function
5.5.6 - reset channel settings
In the dynamics menu the parameters of the compressor and the limiter can be edited.
To edit parameters, select the desired box. The values can be set via the arrow buttons on the right.
A green highlighted ‘power’-button indicates that the corresponding function is activated.
The copy-paste function is available on the top right at any time in the dsp
channel menu. Use it to copy the settings of the selected channel.
In the copy function menu you are able to copy general-, crossover-, equalizer,
dynamics- or all parameter settings.
The reset function is available on the top right in the dsp channel menu.
Selected parameters are highlighted in green.
These selected parameters can be assigned
to either selecting individual or all channels.
The ‘cancel’-button deletes the selection.
To perform the copy-option tap on the
‘copy’-button in the lower right corner.
Example of copying a channel:
To copy the crossover and dynamic parameters
from channel 1 to channel 2, 3 and 6 follow the
description below:
1. Choose channel 1 by using the arrow buttons
2. select crossover and dynamics
3. select channels 2, 3 and 6
4. select the ‘copy’-button
5. Confirm the copying process
(Note: general and equalizer parameters will not be
overwritten in the selected channels 2, 3 and 6)
Compressor parameters
Threshold: 0-90.0
Ratio:
1:1-1:100
Knee:
hard/soft
Attack:
1-1.000 dB/s
Hold:
0-2.000 ms
Decay:
1-1.000 dB/s
Limiter parameters
Threshold: 0-90.0
Knee:
hard/soft
Hold:
0-2.000 ms
Decay:
1-1.000 dB/s
