28
d:series amplifiers
manual
control surface
routing screen
Input selection
in groups of eight (1-8, 9-16 or 17-24), which can be set to analog or digital input.
Channel strip overview
Channels are displayed from the top (starting with gain) to the bottom (number of the channel output).
in
number of the input channel
src
source of the input (green: coaxial input source, yellow: optical input source, red: Dante input source,
gray: analog input source)
phase
phase inv/- (‘-’ indicates a phase inversion)
channel overview display
A green bar at the 0 dB line indicates that the channel is unmuted, a gray bar indicates that the corre-
sponding channel is either muted or the input source is set to analog so that a digital input gain can’t be
applied on this channel.
The bar also indicates the digital input gain value set for the corresponding channel (via routing menu). In
that case the bar expands itself downwards to the appropriate dB-position.
Note: On this screen no level meters are displayed.
out
number of the physical output channel
5.3 - routing screen
5.3.1 - Firmware versions higher than 3.0
5.3.2 - Firmware versions before 3.0
At firmware versions higher than 3.0 the routing
screen displays a matrix.
For d:series amplifiers with Dante input card and
firmware versions higher than 3.0 sonible provides
an optional matrix mixer feature to sum multiple
Dante input channels to multiple output channels.*
A detailed description can be found on page 31.
*) Amplifiers with Dante input card ordered before
12/2019 have to be updated by sonible to establish
the availability of the matrix mixer feature.
1
2
1
2
3
