22
d:series amplifiers
manual
control surface
5 - control surface
The d:series amplifier is equipped with a 6.5" touch screen at the front which allows the user to control
and set up the device. It responds to pressure and therefore can be operated by a fingertip.
In this chapter you can find descriptions about the interface structure and how to operate the system.
The interface view is divided in three sections:
2
1
3
(Global) software mute
Independent of the chosen tab, you are able
to access the global software mute-button at
any time in the upper left corner of the screen
to immediately mute all amplifier outputs. If the
global mute is activated, the button changes its
background color to red and the level meters in the
meter tab are grayed out.
There are two ways to instantly mute all amplifier
outputs. The software-based mute function (‘soft
mute’) described above, and the hardware-based
panic mute function (‘panic mute’) by connecting
a hardware switch at the rear of the unit. Further
information about establishing the hardware-based
mute function can be found in chapter 4.6.
The label of the global mute button indicates
which of the two mute options is currently used
(‘soft mute’ or ‘panic mute’).
Main menu
The main menu on the left side of the screen
consists of six tabs: meter, system, routing,
network, DSP and stealth.
The active tab is highlighted in green.
Content window
On the right side of the screen the content window
is placed. It changes according to the active tab.
The name of the active tab is shown at the top of
the window.
1
2
3
