manualshive.com logo in svg

sonible d Series, Руководство пользователя

Поделиться
Скачать
sonible d Series Скачать руководство пользователя страница 31

31

d:series 

amplifi

 ers

manual

control surface

routing menu

Additional routing functions

You are able to route the displayed channels one by one with the activated ‘single’-button or
by using the following functions which are available for amplifi ers with Dante input card and 
installed matrix mixer:

all

 - to patch each channel input to each channel output

row

 - to patch channels in a row

col

 - to patch channels in a column

Gain reduction

1.  Select the desired channel as described above

2.  Use the arrows which are displayed in the bar on the right for editing the value

Read about the routing procedure via remote control chapter 6 ‘remote control’ (page 38).

Matrix mixer 

– Summing of Dante input channels

For d:series amplifi ers with Dante input card and fi rmware versions higher than 3.0 

sonible

 provides the 

feature to sum multiple Dante input channels to multiple output channels.*

The matrix mixer allows to route more than one input channel to outputs.
Via the gain value settings of each of the summed input channels you are able to balance the weight of the 
selected input signal related to the summed output signal.

Based on the availability of this feature you can use additional routing buttons as all, col and row 
(please fi nd the description stated below).

*) Amplifi ers with Dante input card ordered before 12/2019 have to be updated by sonible to establish the 
availability of the matrix mixer.

Содержание d Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды