39
d:series amplifiers
manual
remote control
control tabs
To control more than one d:series amplifier, you simply have to open multiple tabs in your web browser
and enter the respective IP addresses of the desired devices.
Please note, that each device needs a unique IP address. It is ensured by configuration via DHCP as
described in chapter 5.4.
By a mouse click on the control tabs you are able to switch between three control options:
•
routing (only available with digital input card)
•
dsp (only available with dsp module)
•
system stats
Selecting the ‘routing’ tab opens an overview of the current routing settings and parameters.
The routing tab corresponds to the routing screen of the amplifiers touch display. All parameters can be
set via touch display and remote control.
When you are moving the mouse over the patch grid the two green bars give you orientation and
information about the current position concerning the input channel on the y-axis and the output channel
on the x-axis. Gray bars indicate the currently selected channel.
Routing matrix
number of inputs depends on the input card
•
The color of the routing squares depends
on the supplied digital input card. Muted
channels are colored in gray.
•
The displayed number in the routing
square indicates the present gain value of
the channel
•
Gray bars indicate the currently selected
channel
Information and parameters concerning the
optional digital input card
•
Dante:
shows the present state of the
Dante connection including sample rate
•
MADI:
MADI clock source (optical/coaxial)
and smux multiplier (1x/2x), respectively
state of the present sample rate, madi
optical state, madi coaxial state
•
AES/EBU
1
2
6.2 - remote control of more than one amplifier
6.3 - control tabs
6.3.1 - routing tab
1
2
3
