32
d:series amplifiers
manual
control surface
network screen
5.4 - network screen
To integrate the d:series amplifier in a local network for having remote control or rather setting up an
internet connection to check the availability of firmware updates, the CAT connection has to be established
as described in chapter 4.5 and the network interface has to be configured. You are able to configure the
amplifier via DHCP or by manual input.
DHCP
Pressing the DHCP enables a connected DHCP
server to execute all settings automatically. To
renew the DHCP lease you have to select the
‘renew’-button.
The IP address is necessary information to access
the remote control from your browser (see chapter
6 ‘remote control’).
Use the ‘cancel’ button to restore the configuration you had before or press the ‘apply’ button to apply
your configuration. During that request the connection state will change its color to yellow. If the request
was successful, the ‘state link up (Internet)’ text will turn green – your configuration is applied and the
‘apply’ button will turn gray again.
Possible connection states are
link up (Internet)
- a valid Internet connection is established
link up (no Internet)
- LAN connection without Internet connectivity is established
link down
- no LAN connection it established (please check if the Ethernet cable is connected correctly)
checking
- the checking state is shown when the amplifier is trying to establish a connection (the controller
attempts to apply the network configuration)
NOTE: Currently, the amplifier only supports IPv4.
Manual input
Press the ‘manual’ button to switch to manual
mode. In manual mode all network configuration
data has to be entered manually via the number
pad located on the right of the screen.
Press the ‘edit’ button to execute the manual
configuration. Select a white text box and enter
values via the numeric keypad. Navigate the text
boxes with the ‘tab‘ button.
The ‘del‘ button bottom left will delete values in
the current text box or the previous text box if the
current one is empty.
