30
d:series amplifiers
manual
control surface
routing menu
5.3.3 - routing menu
In the routing menu you are able to route the
inputs to the outputs, modify settings such as gain
reduction, phase inversion and to mute a selected
input channel.
NOTE: Routing options are only available with an
optional digital input card.
The routing menu is consistent with all digital input
cards. With a MADI input card there is an additional
button to select the optical or coaxial input.
Navigation through the channels
You have got two options to navigate through the channels at the patch bay
(1)
, either by tapping on the
desired channel in the patch bar or by using the arrows on top of the routing menu
(2)
- single arrow for
single steps, double arrow for steps of eight
Routing individual channels
1. Select the desired channel as described above
2. Select the ‘single’ button on the right
(3)
3. Confirm the routing by a tap on the white button with the checkmark
(4)
to the right of the patch bay
To route subsequent channels in the displayed grid use the sequential routing button as described below.
Sequential routing
The ‘sequential routing’-button allows for easy 1:1 sequential routing starting at the currently
selected channel. All edited parameters such as phase inversion, gain reduction and the
mute state will be copied to the subsequent channels too.
1
1
2
2
3
3
4
4
Phase inversion and channel muting
1. Select the desired channel as described above
2. Select the desired function on the right side of the screen
Note: The mute-button relates to the input of the respective channel, in contrast to the mute
button in the DSP menu which relates to the output of the DSP module.
