41
d:series amplifiers
manual
remote control
control tabs
DSP overview tab
As depicted in the graphic the dsp tab displays all channel strips from the top (starting with gain) to the
bottom (number of the channel output):
gain dB:
displays the numeric value of the gain in dB
inv:
displays the state of the phase inversion as ‘+’ or ‘-’ (‘-’ indicates a phase inversion)
dly ms:
delay - displays the numeric value of the delay in ms
xo:
crossover – an activated crossover is labeled in green
eq:
equalizer – activated and edited EQ bands are labeled in green
comp:
compressor - a green dot indicates that the compressor is activated,
a gray dot indicates that the compressor is deactivated.
gain red:
gain reduction - the gray dot turns to yellow in case of current gain reduction
lim:
limiter - a green dot indicates that the limiter is activated, a gray dot indicates
that the limiter is deactivated.
gain red:
gain reduction - the gray dot turns to red in case of current gain reduction
out:
output - number of the output channel. A red number indicates the channel is muted.
Darkened sections indicate that those functions are deactivated in the respective channel strip.
A click on the copy-button on the right of the DSP overview opens the copy-paste function which can be
used as described further down on page 36.
6.3.2 - dsp tab
Selecting the dsp tab opens an overview of the settings and parameters which can be edited with the
optional included dsp module.
The dsp tab corresponds to the dsp menu of the amplifiers touch display. All parameters can be set via
touch display and remote control.
