manualshive.com logo in svg

sonible d Series, Руководство пользователя

Поделиться
Скачать
sonible d Series Скачать руководство пользователя страница 37

37

d:series amplifiers

manual

control surface

stealth screen

Stealth mode

The d:series amplifier offers an option to switch off the display. For example, in case of usage in the dark, 
where the display light would disturb the environment.  Select the ‘enable’-button on the right to switch 
off. It can be activated by pressing anywhere on the screen.

Note: If the screen is not touched for a certain time, it will be dimmed automatically.

Fan mode

The d:series amplifier provides five different fan modes: low, normal, high, linear, silent. By default, the fan 
mode at startup of the amplifier is set to ‘normal’. Selected other modes are just activated until the device 
is shut down.

low, normal, high

The fan modes ‘low’, ‘normal’ and ‘high’ enable static fan speeds until the temperature exceeds a 
predefined limit. If the predefined limit is reached, the fan speed will be ramped up according to the 
measured temperature. A detailed performance information can be found in the graphic below.

linear

By selecting the linear fan mode, the fan speed will be set according to the measured temperature. 

silent

In silent mode, the fans slow down to minimize ventilation noise. 
In case the amplifier heats up to a predefined maximum temperature (as shown in the graphic below), the 
fans accelerate to cool the circuits down to normal working conditions.

5.6 - stealth screen

Содержание d Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды