SOLZAIMA Hidro 12, Инструкция по эксплуатации

Страница: 97 / 147

91
The tubes through which the gases and the respective turbulators circulate must be
cleaned. To do that, open the cover located in the upper part of the equipment (Figure
56-a and Figure 56-b) and remove the 4 knobs that fix the upper cover (Figure 56-c
and Figure 56-d). Then pull the turbulators upwards (Figure 56-e). A hoover should be
used to clean this area (Figure 56-f) and the inside of the pipes can be cleaned with a
steel brush. The removed turbulators should also be cleaned with a steel brush).
To put the turbulators back on, proceed in the opposite way to that shown in the
figures.
a) b)
c) d)
e) f)
Figure 56 - Cleaning the air flow pipes and turbulators