27
To set the
stopping time
for Programme P1, press “set”. The display starts to flash.
Press the “+” or “-” key to select the time and then press “ok” to confirm. Press the
“+” key to go to the “P1 Temp.” (P1 Air Temp.) menu.
Important:
Each program can
only
be configured within the
same
day.
To set the
set point temperature
for Programme P1, press “Set”. The display starts
to flash. Press the “+” or “-” key to select the desired temperature, followed by “Ok”
to confirm. Press the “+” key to go to the “P1 Temp. Água” (P1 Water Temp.) menu.
To select the
set point water temperature
in program P1, press “set” and start
flashing, press “+” or “-” to select the desired temperature, press “ok” to confirm
value. Press the “+” key to move to the “Fire” menu.
Содержание Hidro 12
