Smiths Medical SurgiVet Advisor WWV9230, Руководство по эксплуатации

Страница: 88 / 122

Chapter 9: Non-invasive Blood Pressure
9-8 Veterinary 3 Parameter Advisor
®
Operation Manual
AUTO NIBP Mode
If you selected AUTO as the NIBP MODE, the first measurement will begin after the interval time has elapsed. The
time remaining (00:00:00) will flash for several seconds indicating that an NIBP measurement is going to begin.
NOTE! If you suspend patient monitoring (by selecting SUSPEND from the main menu) while AUTO is
the selected NIBP mode, the monitor will return to the default mode (MANUAL) when you resume
monitoring.
If the measurement is successful, you will see the systolic, diastolic, and mean arterial pressure values displayed
in the NIBP parameter box and you will hear the completion beep. The time of the successful reading will also be
displayed in the parameter box. The automatic measurement interval will be reset, and another measurement
will begin as soon as the interval time has elapsed.
If the measurement is not successful, the previous pressure values will be displayed. If there is no previous data,
you will see dashes (- - -) displayed in the place of the pressure values. The monitor will attempt to obtain a
reading for up to 120 seconds for cat and dog patient types. For the horse patient type, the monitor will retry
for 90 seconds. If the monitor is unable to take a measurement, you will hear a bell tone and see a message
displayed in the parameter box. To acknowledge the NIBP error message, press the NIBP key (
h
) on the
monitor while the message is displayed in the NIBP parameter box. The automatic measurement interval will be
reset.
STAT NIBP Mode
If you selected STAT as the NIBP MODE, the first measurement will begin immediately and a five-minute timer is
started. NIBP measurements are taken repeatedly until the five minutes have elapsed.
If the measurement is successful, you will see the systolic, diastolic, and mean arterial pressure values displayed
in the NIBP parameter box and you will hear the completion beep. The time of the successful reading will also be
displayed in the parameter box. When the five minutes have passed or if you press NIBP key (
h
) to cancel, the
mode will automatically return to the previous setting (MANUAL or AUTO).
If the measurement is not successful, the previous pressure values will be displayed. If there is no previous
data, you will see dashes (- - -) displayed in the place of the pressure values. You will hear a bell tone and see a
message displayed in the parameter box. To acknowledge the NIBP error message, press the NIBP key (
h
) on
the monitor while the message is displayed in the NIBP parameter box. NIBP readings will not continue until the
error message is acknowledged, but the five-minute timer will continue to run.
Canceling an NIBP Measurement
Regardless the selected mode (AUTO, MANUAL, or STAT), you can stop a measurement in progress by pressing
the NIBP key (
h
) on the monitor.
If the monitor is in automatic (AUTO) mode, another measurement will start after the selected interval has
elapsed.
If the monitor is in STAT mode and you press the NIBP key (
h
) to cancel the measurement, the mode will
automatically return to the previous setting (MANUAL or AUTO).