SMC Networks JXC93 Series, Руководство по эксплуатации

Страница: 29 / 113

-28-
No. JXC
※
-OMT0002-C
4.3 Parts Description
Detail of the controller parts.
No. Display Description Details
1 PWR Power supply LED (green)
OFF Power supply OFF
Green LED is ON Power supply ON
2 RUN Operating LED (green)
OFF Stop
Green LED is ON Operation by EtherNet/IP
Green LED is flashing Operation by USB communication
3 USB USB LED (green)
OFF USB not connected
Green LED is ON USB connected
4 ALM Alarm LED (red)
OFF No alarm
Red LED is ON Alarm condition
5 USB Serial communication Connect to a PC using a USB cable.
6 C PWR
Main control power supply
connector (2 pin)
Note)
Main control power supply (+)(-)
7
x100
x10
x1
IP address setting switches
Switch to set the 4th. byte of IP address by X1, X10 and
X100.
8 MS, NS Communication status LED Display the status of the EtherNet/IP communication.
9 ENC1 Encoder connector (16 pins)
Axis 1: Connect the actuator cable.
10 MOT1 Motor power connector (6 pins)
11 ENC2 Encoder connector (16 pins)
Axis 2: Connect the actuator cable.
12 MOT2 Motor power connector (6 pins)
13 CI 1 2
Motor control power supply
connector
Note)
Motor control power ), Axis 1 stop(+), Axis 1
), Axis 2 stop(+), Axis 2 unlock (+)
14 M PWR 1 2 Motor drive power connector
Note)
Axis 1, Axis 2 Motor drive power (+)
,
common(-)
15 ENC3 Encoder connector (16 pins)
Axis 3: Connect the actuator cable.
16 MOT3 Motor power connector (6 pins)
17 ENC4 Encoder connector (16 pins)
Axis 4: Connect the actuator cable.
18 MOT4 Motor power connector (6 pins)
19 CI 3 4
Motor control power supply
connector
Note)
Motor control power ), Axis 3 stop(+), Axis 3
), Axis 4 stop(+), Axis 4 unlock (+)
20 M PWR 3 4 Motor drive power connector
Note)
Axis 3, Axis 4 Motor drive power (+)
,
common(-)
21 P1, P2
EtherNet/IP communication
connector
Connect Ethernet cable.
Note)The connector is included
.
Refer to section 6. Power supply connector .
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(20)
(19)
(17)
(18) (21)