Smartgen HGM9520N, Руководство пользователя

Страница: 71 / 111

HGM9520N Genset Paralleled Controller User Manual Page 71 of 111
No. Items Parameters Defaults Description
9. Call Sets Mode (0~1) 0
0: Gen Power (%); 1: Available Power.
(Not available for HGM9520N)
10. Call More Sets(%) (0~100)% 80
Schedule the load value of other gensets
when start the genset on demand.
(Not available for HGM9520N)
11. Call Less Sets(%) (0~100)% 50
Schedule the load value of other genset
when start the genset on demand.
(Not available for HGM9520N)
12. Call More Sets(W) (0~6000)kW 200
Schedule the available power value of other
genset when start the genset on demand.
(Not available for HGM9520N)
13. Call Less Sets(W) (0~6000)kW 400
Schedule the available power value of other
genset when start the genset on demand.
(Not available for HGM9520N)
14. Freq Feedback (0~200)% 10
It is frequency feedback coefficient in
configuring active power distribution.
(Not available for HGM9520N)
15. Volt Feedback (0~200)% 10
It is voltage feedback coefficient in
configuring active power distribution.
(Not available for HGM9520N)
16.
Ground Relay Close
Fail
(0~7) 7
0: None; 1: Warning; 2: Block; 3: Safety Trip;
4: Safety Trip and Stop; 5: Trip; 6: Trip and
Stop; 7: Shutdown.
(Not available for HGM9520N)
17.
Ground Relay Open
Fail
(0~7) 1
0: None; 1: Warning; 2: Block; 3: Safety Trip;
4: Safety Trip and Stop; 5: Trip; 6: Trip and
Stop; 7: Shutdown.
(Not available for HGM9520N)
18. Static Parallel Delay (0~600)s 60
If static paralleling is not completed during
“Static Parallel Delay”, controller will initiate
alarm information.
(Not available for HGM9520N)
19. Economy Fuel (0~1) 0
0: Disable; 1: Enable
All gensets should be configured the same
economy fuel value.
(Not available for HGM9520N)
20. Economy Fuel (%) (0~100)% 60
It is the economy fuel percentage of genset.
(Not available for HGM9520N)
21. Economy Sawp(W) (0~6000)kW 200
Economy fuel consumption starts
exchange if difference value of the total
rated power of the exchange gensets and
the total power of the current loading
gensets is greater than the set exchange