Sunny Island 4500
Installation & Operating Instructions
BWRI45-13-EE0304
- 92 -
SMA Regelsysteme GmbH
An AC grid is only available when the Sunny Island has been set into the
operating mode “RUN_U“ in the “START“ (2-1) menu (see Chapter 7.1).
6.1.2 “Slave” Sunny Island (“New Sys SLAVE”)
In order to configure a Sunny Island that is intended for being a “Slave” in a system
(e.g. in a three-phase system or in single-phase multiple-Sunny Island system (see
Chapter 11.6)) select “New Sys Slave” in the corresponding menu (as described in
Chapter 5) with the arrow keys and confirm with
[
ENTER
].
Now enter the password
for „Level: 1“ (installer).
Fig. 6.2:
Display to enter password
As soon as you have entered the password correctly all settings and val-
ues acquired adaptively up to this point are overwritten with standard va-
lues!
After you have entered the password you will reach a menu where you have to set up
essential, “Slave”-oriented parameters. As the main control functions are performed
by the “Master”, only a few parameters that should be set for “Slaves” remain:
