GTBZ26&28J Service Manual
1
Foreword Safety Notices for Maintenance
A Overview
This chapter includes basic safety notices that
must be abided by in the maintenance process
of aerial work platform. The maintenance
personnel must strictly follow safety warnings
and notices to prevent injury to themselves or
others or damage to the equipment.
Maintenance
plan
must
be
strictly
implemented during the maintenance to ensure
the machine operates safely.
The machine cannot be altered before the
authorities believe that it has the same
safety as the original equipment.
Relevant key points in the manual describe
specific notices that must be followed in the
maintenance process. In most cases, these
notices must be abided by during maintenance
of hydraulic system and large machine
components.
Safety of yourself and others shall be the first
consideration during equipment maintenance.
Be sure to always pay attention to weight. Do
not move heavy parts without assistance of
mechanical equipment. Weight cannot be put
at any unstable position. Adequate support
shall be ensured when a part of the equipment
is lifted.
As the machine manufacturer cannot
directly control site inspection and
maintenance process, safety of the
maintenance site shall be under the
responsibility
of
the
machine
owner/operator.
B Safety of Hydraulic System
Hydraulic system of the machine works under
the pressure with extremely high risk.
Therefore, pressure of the system shall be
released as far as possible before demolishing
or removing a part of the system.
C Maintenance
Violation of safety regulations listed in the
chapter may lead to machine damage and
personal injury.
Make sure the replaced parts are the same
or similar to original parts.
Smoking is forbidden. Filling of oil is
forbidden in lightning and storm. Make
sure the oil tank cover is closed and
under safe status at all time.
Please remove all rings, watches and
ornaments during the maintenance.
During the maintenance, please do not
wear too long hair or loose garment or tie
that is likely to be twined on the
equipment.
Observe all warnings and notices on the
machine and in the service manual.
Wipe off oil, grease and water on the
standing surface and handrail.
It is a must to observe notices for
detection of hot-pressing coolant system.
Warning
Warning
Warning
Содержание GTBZ26
Страница 29: ...GTBZ26 28J Maintenance Manual 26 Figure 3 3 Reducer Breakdown Drawing...
Страница 50: ...47...
Страница 55: ...52...