Siemens SIMATIC IPC1047 Скачать руководство пользователя

Страница: 28 / 136

Installing and connecting the device

3.1 Preparing for installation

SIMATIC IPC1047

Operating Instructions, 09/2018, A5E45118479-AA

●

Production version (FS): A, B to H

●

Microsoft Windows "Product Key" from the "Certificate of Authenticity" (COA label). You

will need the Product Key if you reinstall the operating system.

3.1.2

Checking the delivery package

Procedure

When accepting a delivery, please check the packaging for visible transport damage.

If any transport damage is present at the time of delivery, lodge a complaint at the

shipping company in charge. Have the shipper confirm the transport damage

immediately.

Unpack the device at its installation location.

Keep the original packaging in case you have to transport the unit again.

Note
Damage to the device during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and

moisture may impact the unprotected unit. Damaged packaging indicates that ambient

conditions have already had a massive impact on the device and it may be damaged.
This may cause the device, machine or plant to malfunction.

•

Keep the original packaging.

•

Pack the device in the original packaging for transportation and storage.

Check the contents of the packaging and any accessories you may have ordered for

completeness and damage.

Содержание SIMATIC IPC1047









































































































































Результаты поиска

Содержание SIMATIC IPC1047

Отзывы:

Похожие инструкции для SIMATIC IPC1047

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC1047, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC1047

Отзывы:

Похожие инструкции для SIMATIC IPC1047

Бренды по названию

Популярные бренды