Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 14 / 132

Overview
1.5 Typical applications
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
14
Operating Instructions, 04/2013, A5E03474888-02
Access to a server via "RDP".
The Industrial Thin Client uses RDP (Remote Desktop Protocol) to access a server, such as
an industrial PC or a PC. The following applications are also possible.
●
WinCC/Web Navigator
The Industrial Thin Client uses an Internet browser on the server to access the WinCC
Web Navigator as a Web Navigator client. In this case, the operating system Windows
Server 2003 or 2008 must be installed on the server. For more information, refer to the
documentation for the WinCC/Web Navigator option.
● The Industrial Thin Client accesses an Office application (e.g., MS Excel) or SAP
application on the server. In contrast to the Windows Server operating systems, you can
only operate one screen with Windows XP and Windows 7. The other monitor is always
blocked.
● The Industrial Thin Client accesses an Office application running in Windows Server 2003,
(e.g., MS Excel) or SAP application on the server.
The following figure shows one possible configuration with the Windows Server operating
system on an Industrial PC or a PC.
,QGXVWULDO
7KLQ&OLHQW
352),1(7(WKHUQHW
,QGXVWULDO
7KLQ&OLHQW
,QGXVWULDO
7KLQ&OLHQW
,QGXVWULDO
7KLQ&OLHQW
,QGXVWULDO
7KLQ&OLHQWQ
$XWRPDWLRQV\VWHP
,QGXVWULDO3&V
Access to a server via "VNC"
You use VNC in a similar way as RDP to remotely monitor and run a PC and to monitor its
screen outputs. In contrast to RDP, all clients display the same server screen.
Access to SINUMERIK
The Industrial Thin Client accesses the SINUMERIK system network through the
SINUMERIK connection. The system network configures the Industrial Thin Client to be a
SINUMERIK Thin Client Unit (TCU). You use the TCU for operator control and monitoring of
a SINUMERIK PCU or SINUMERIK NCU.