Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 70 / 132

Assigning device parameters
5.4 Remote configuration of several devices
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
70
Operating Instructions, 04/2013, A5E03474888-02
3. Use drag-and-drop to move devices to the new "Machine1" folder in the device tree
④
.
The folder is saved retentively in the local device memory. As a result, the device is
always assigned to this folder.
Note
Devices of earlier versions
The firmware version V1.x does not support folders. Therefore, older devices cannot be
assigned and always appear in the "Thin Clients V1.X" folder.
Permanently renaming or deleting the folder
In order to save the folder together with the configuration setting on each device, the
configuration settings of all devices in the folder must be changed (see section "Overview
of remote operation (Page 69)").
4. Select a device in the device window
④
, e.g., from the "Machine1" folder.
5. Click the "Identify device" button. The screen of the device flashes at the location on
Maschine1.
6. Select several devices. To do this, open the on-screen keyboard and hold down the
<Ctrl> key while selecting several devices one after the other in the device window
④
.
7. You can select "Restart devices" or "Update firmware" for the selected devices from the
toolbar
②
. Note the additional information in the section "System settings (Page 41)".
In both cases, an action dialog appears with a progress bar and device list. Based on the
device status, you see if the configuration settings are being saved ("In progress") or if
the device can be restarted ("Ready"). Detailed information is available in the section
"Status (Page 75)".
Note
Restrictions for actions
You can only perform one action after another on a device. Before performing an action
on a device, wait until the actions on all selected devices have been completed.