Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 82 / 132

Configuring the server
6.1 RDP
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
82
Operating Instructions, 04/2013, A5E03474888-02
Licensing Windows XP Professional and Windows 7
You do not require any licenses on your device under Windows 7 to access the server. Only
one license on the PC for your operating system, e.g. Windows 7.
You do not require any additional licenses on the server for Remote Desktop. Only one
screen can be operated for Remote Desktop with the Windows XP Professional operating
systems. You can operate either the screen on the server or the touch screen on the device.
The other monitor is always blocked.
See also
Requirements (Page 16)
6.1.2 Administration on the server
Administration Windows Server 2003 and 2008
The administration on the server depends on the individual IT infrastructure. Establish the
settings for the server configuration under the following menu commands under "Start >
Programs > Administrative Tools:"
●
Terminal services configuration
● Terminal services administration
● Terminal services licensing
You will find more information on the Internet in the "MSDN Knowledge Base" of the
"Microsoft support ( You can specify on the server that certain users of the Industrial Thin Client can only access
specified programs on the server.
When the device is configured, you assign a password for the connection to the server. If the
device establishes a connection to the server, a password will be requested by default
irrespective of this. Under "Start > Programs > Administrative Tools > Terminal Service
Configuration" you can specify that the password is not requested again.
Administration Windows XP Professional
The following statements for Windows XP also apply to Windows 7.
In order for the Industrial Thin Client to access the server, you must enable remote access
on the server. You can enable remote access under "Start > Settings > Control Panel >
System > Remote" with the option "Allow users to establish a remote desktop connection."
Use the "Select remote users" button to open a dialog in which you select the users that are
authorized to access the server.
In addition, you enable the server ports that have been set for remote access in the firewall.