Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 75 / 132

Assigning device parameters
5.4 Remote configuration of several devices
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
75
5.4.4.3 Status
A status symbol and monitor icon is displayed in the device tree to the right next to the
device name.
●
The status describes the outcome of the last action for each device.
● The monitor icon displays the firmware version of the device.
● A question mark means no version information is available, for example, if the device
cannot be found.
Icon Designation Meaning
Ready The (latest) action performed on the device was completed
successfully.
The Industrial Thin Client was found on the network and can be
reached via its IP address. The current network settings and the latest
device data are displayed.
Error The (latest) action performed on the device was not completed
successfully.
Possible causes:

No Industrial Thin Clients were found in the network
 The device is not accessible via the private key.
Info The Industrial Thin Client cannot be reached in the network via its IP
address. The displayed device data may not be current.
Possible causes:
 The device has an incorrect IP address or no IP address.

The device is in a different IP network (subnet).
 The network adapter has an incorrect IP address.
Or the firmware on the device does not support the (last) action, see
section "Perform action (Page 74)".
Example action "Update firmware":
 You attempt to update firmware V1.x.
Restart The device is restarting.
In progress An action (not a restart) is not yet completed on the device.
Note
A status message is shown under "Information" in addition to the general device data under
"Status" in the device window of the configuration settings.
See also
Overview of remote operation (Page 69)