Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 54 / 132

Assigning device parameters
5.3 Configuration settings of the device
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
54
Operating Instructions, 04/2013, A5E03474888-02
5.3.5.3 Connection settings
By way of example, the following figure shows the connection settings for an RDP
connection in the Start menu "Configuration > Connections".
You select a client-server connection, or create a new one. The following connection settings
can be specified:
Note
Grayed-out fields
Not all connection settings are available for each type of connection (exception: RDP).
Connection settings that are not required are grayed out.
● The "Connection type" specifies the type of client-server connection, e.g., RDP
connection, VNC connection, etc.
● In "Connection name", you enter a name for the client-server connection, e.g., "Server
screen 1". The client-server connection will then appear with this name in selection
menus. If the operator selects "Server screen 1" in the taskbar, for example, the client-
server connection configured with this name will be started.
● In "Description", you enter a text for the client-server connection. This description then
appears in selection menus under "Connection name".
● Under "Server (IP address)", you specify an IP address or host name at which the server
can be reached.