Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 112 / 132

Technical specifications
9.4 Technical specifications
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
112
Operating Instructions, 04/2013, A5E03474888-02
9.4.2 Performance data
Performance values
The performance depends on the network capacity in your system. With the SIMATIC
WinCC Sm@rtServer option, the performance varies within the values specified in the
WinCC documentation.
See also
FAQ 255765)
9.4.3 Ambient conditions
9.4.3.1 Transport and storage conditions
Mechanical and climatic conditions for transportation and storage
The requirements regarding transport and storage conditions for the device are more
stringent than those laid down in IEC 61131-2. The following requirements apply to the
transport and storage of the device in its original packaging.
The climatic conditions conform to the following standards:
●
IEC 60721-3-2, Class 3K7 for storage
● IEC 60721-3-2, Class 2K4 for transport
The mechanical conditions correspond to IEC 61131-2.
Type of condition Permitted range
Drop test (in transport package) ≤ 1 m
Temperature From –20 to +60° C
Atmospheric pressure From 1080 to 660 hPa,
Corresponds to an elevation of –1 000 to 3 500 m
Relative humidity From 10 to 90%, without condensation
Sinusoidal vibration in accordance with
IEC 60068-2-6
5 to 8.4 Hz: 3.5 mm
8.4 to 500 Hz: 9.8 m/s
2
Shock in accordance with IEC 60068-2-29 250 m/s
2
, 6 ms, 1000 shocks
Note
Avoid dewing
If the HMI device is subjected to low temperatures or extreme fluctuations in temperature
during transportation, moisture could occur on or inside the HMI device. Dewing can occur.
This can cause malfunctions.
The device must be brought to room temperature before it is commissioned. Do not expose it
to direct heat radiation from a heating device. If there is condensation, wait approximately
4 hours until the device has dried completely before switching it on.
Proper transport and storage, installation and assembly as well as careful operation and
maintenance are prerequisites for trouble-free and safe operation of the device.
Non-compliance shall result in the voiding of the device warranty.