Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 71 / 132

Assigning device parameters
5.4 Remote configuration of several devices
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
71
Save the configuration file remotely and restore it
The configuration file contains all device-specific configuration settings with the exception of
the background image and the touch calibration. Save the configuration file of a device on
the central PC. From there, you can restore the configuration file to a device:
●
Use the "Save" button to back up the configuration file for the device on the PC. To do
this, you select a folder in the file system and close the dialog with "OK". The
configuration file is saved to the folder.
● Use the "Restore" button to reload the backed up configuration file from the PC, for
example, if the current configuration file was overwritten inadvertently. To do this, you
select a configuration file from a file dialog and close the dialog with "OK".
Note
Pay attention to all the information in the section "Configuration settings of the device" in
the corresponding section of the "System settings".
See also
Installation (Page 67)
Perform action (Page 74)
Opening the configuration (Page 35)
Assigning the IP address (Page 76)
Network settings (Page 46)