Siemens HiPath 1100 Скачать руководство пользователя страница 3

Страница: 3 / 241

Introduction

Important Notes

The information in this document provides only general descriptions of the features. The

actual features may not correspond exactly to the descriptions herein and, furthermore,

they are subject to changes to the extent that products continue to be developed.

The selection of features to be provided is not binding unless explicitly established in the

terms of the contract.

Trademarks

Do not install the system or telephone sets where there may be a risk of

explosion.

To ensure optimal performance and

operation use only original accesso-

ries manufactured by Siemens.

Never open the system or dismantle any of the telephones. If you have

any problems, ask for assistance from your System Administrator.

Care of the equipment

Keep containers with liquids, such as tea, coffee, soft drinks etc. away from the system

and telephones to prevent spillage.

This equipment conforms to the EU Directive 1999/5/EG, as attested by

the CE mark.

This device has been manufactured in accordance with our certified en-

vironmental management system (ISO 14001). This process ensures the

lowest consumption of raw materials and energy as well as the lowest

production of industrial waste.

For compliance with EU directives, do not discard any batteries, electri-

cal or electronic equipment marked with this symbol in common house-

hold garbage. Discard this type of waste at a local recycling or waste dis-

posal facility.

Содержание HiPath 1100


















































































































































































































































Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды

Siemens HiPath 1100, Руководство по программированию

Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды