Siemens HiPath 1100 Скачать руководство пользователя страница 167

Страница: 167 / 241

EVM module

167

Step by step

Default configuration of the LAN inter-
face

This restores the default configuration of the LAN inter-

face module.

ADSL modules

– Default IP of the module: 10.0.0.1

– Default Subnet Mask of the module: 255.255.255.0

SLIMC, SADSLIM, LIMC or ADSLIM modules

– Default IP of the modem: 192.168.254.254

– Default IP of the module: 192.168.254.253

– Default Subnet Mask of the module: 255.255.255.0

– Default Gateway of the module: 192.168.254.254

Required:

Programming mode must be activated (*95

31994).

deg

Enter the programming code.

Initial status for programming mode.

EVM module

EVM (Entry voice mail) is a voice mail solution for HiPath

1100 systems. Its features are controlled through he

keys on a system telephone or any type of equipment

with MF dialing capability.

EVM is configured and activated by technical personnel

through the HiPath 1100 Manager administration soft-

ware or a programming extension.

Feature Overview

• 24 default mailboxes, 2 of which can be used as for-

warding mailboxes (message/greeting for day or

night service).

• 4 virtual ports ( 744 to 747)

An EVM Module can operate simultaneously

with a Fax/DID facility except as follows: An EVM

is not configured for Auto-Answering, since this

capability is covered by the Fax/DID Module.

Содержание HiPath 1100


















































































































































































































































Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды

Siemens HiPath 1100, Руководство по программированию

Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды