Siemens HiPath 1100 Скачать руководство пользователя страница 159

Страница: 159 / 241

Digital trunk settings

159

Step by step

E1 CAS access

E1 CAS access allows the system to use Caller ID and

direct dialing to extensions, reducing the number of lost

calls and simplifying access for the user. The HiPath

1150 can be equipped with one TME1 module (config-

ured for up to 15 standard channels or 20 expanded

channels) and the HiPath 1190 with two TME1 mod-

ules.

When only E1 digital lines are used, you only need to

program the external number registration. Country code

and area code can be left blank.

Note:

• Country code and area code are never sent to the

public exchange.

Access S2

Each ISDN access provides 30 communications chan-

nels (64 kbps each) as well as a capability for sharing ap-

plications such as video conferencing or Internet ac-

cess. Depending on whether your carrier has activated

them, some features such as Calling Line Identification

Presentation (CLIP) and Malicious Call Identification

(MCID), Calling Line Identification Restriction(CLIR),

among others, may be provided. The HiPath 1150 can

be equipped with one TME1 module (configured for up

to 30 channels) and the HiPath 1190 with two TME1

modules (the first configured for up to 30 channels and

the second up to 15 channels).

When only digital lines are available, the settings for

DID prefix, external number phonebook, country code,

and area code must be configured.

A TME1 with S2M access operates on TEI (Termi-

nal Endpoint Identifier) non-automatic mode). The

TEI value must be configured in the S2M Mainte-

nance tool.

This service is only available for Italy.

Содержание HiPath 1100


















































































































































































































































Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды

Siemens HiPath 1100, Руководство по программированию

Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды