Siemens HiPath 1100 Скачать руководство пользователя страница 193

Страница: 193 / 241

VMIe protocol

193

Step by step

3. Direct internal call from Extension 11 to Extension

15, forwarded to the VMIe group configured as sec-

ond attendant. ***4****11****15*1;

4. Incoming call over an analog trunk to Extension 11,

forwarded (*11) to the VMIe group:

***3**********11*3;

5. Incoming call over a digital line to Extension 11, for-

warded (*11) to the VMIe group:

***3**********11*4;

6. Incoming call over an external analog line to Exten-

sion 12, forwarded to the VMIe group configured as

second attendant. ***4**********12*3;

7. Incoming call over a digital line to Extension 12, for-

warded to the VMIe group configured as second at-

tendant. ***4**********12*4;

8. Direct internal call from Extension 1015 to Extension

1011, forwarded to the VMIe group (*11):

***3**1015**1011*1;

9. Direct internal call from Extension 10015 to Exten-

sion 10011, forwarded to the VMIe group configured

as second attendant. ***4*10015*10011*1.

Voice mail Protocol for the system:

The voice mail signals to indicate when there is a mes-

sage waiting at an extension’s mailbox. For this purpose

it uses a DTMF service code (*68) followed by the ex-

tension number. When a message is erased, a different

DTMF code (#68) is used to deactivate the signal at the

extension that belongs to the VMIe group. In the event

these codes are not supported by the voice mail Sys-

tem they can be re-programmed. Please check items "

Deenabling the Internal MWI #68" and "Activating the

Internal MWI Internal *68" in the HiPath 1100 System

Manager "System Settings - Service Code" folder.

Example:

1. The voice mail System indicates that Extension 13

has a message waiting in mailbox: *6813;

2. The voice mail System indicates that the mailbox for

Extension 12 is empty: #6812.

Содержание HiPath 1100


















































































































































































































































Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды

Siemens HiPath 1100, Руководство по программированию

Результаты поиска

Содержание HiPath 1100

Отзывы:

Похожие инструкции для HiPath 1100

Бренды по названию

Популярные бренды