Siemens CP 1243-8 IRC, Руководство по эксплуатации

Страница: 64 / 140

Configuration and operation
4.7 Configuration in STEP 7 Basic
CP 1243-8 IRC
64
Operating Instructions, 06/2015, C79000-G8976-C385-01
Parameter group "Telephone directory"
Parameter in STEP 7 Basic /
Professional
Parameter in STEP 7 V5 Configuration in STEP 7 V5 Remarks
TelephoneNumberType Own tel. number Properties WAN network
nodes > "Dialing Param.“ tab
Re-Dial Redialing attempts Properties Network > "Net-
work Settings"
DisconnectParameter Cancel parameter Properties Network > "Net-
work Settings"
WAN DriverType WAN driver type (master
station / node / station)
SpecialService Special service Properties WAN network
nodes > "Dialing Param.“ tab
SMS special services
TelefonNumberStatus SINAUT configuration tool >
tab "Telephone Directory"
>Properties - Telephone
Number
Enable status of the sub-
scriber (enabled / disabled)
StationNumber Station address
TelefonNumber SINAUT configuration tool >
tab "Telephone Directory"
>Properties - Telephone
Number
Phone number of the sub-
scriber, components: Initiali-
zation command (max.. 28
characters) or "AT", Dial
command (max.. 4 charac-
ters.), telephone number
(max.. 32 characters)
4.7.6 Parameter group “Partner stations”
Import partner configuration
With the "Import partner configuration" button, you import the text data with the STEP 7 V5
configuration data of the proxy from the file system of the engineering station.
You will find a description of the parameters in the following sections.
Reset partner configuration
With the "Reset partner configuration" button, you delete all the configuration data of the CP
that you previously imported from a text file with the "Import partner configuration" button.
With this function you reset the partner configuration data to the status of an unconfigured
module.
Imported configuration:
This output box shows the name of the text file whose configuration data you last loaded on
this CP.