Siemens ADVIA 1800 Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 222

Siemens ADVIA 1800 Скачать руководство пользователя страница 98

98

ADVIA 1800 Operator’s Guide

Emergency stop, shutdown, and recovery procedures

Stopping operation after the analyzer is started

WARNING

Make sure that all probes and mixers are free to move without obstruction and that
all analyzer covers are in place to avoid possible injury and damage to the analyzer.

1.

At the power panel, press the

Emergency Stop

button.

2.

Select

Initialize

.

3.

If reagents were dispensed, you must perform a weekly Wash 2 before resuming
operation.

Managing an expected power outage

If you know in advance of an upcoming power outage, do the following:

1.

Turn off the workstation and analyzer power by performing the normal shutdown.

2.

If you expect the power supply to be cut off for a long period of time, remove the
reagents in RTT1 and RTT2 and refrigerate them.

3.

When the power returns, perform the normal startup operation.

Responding during a power failure while electric power is still off

While the electrical power is still off, do the following:

1.

Turn

OFF

the workstation power switch.

2.

At the power panel, set the analyzer Operate/Standby switch to

Standby

.

When the electrical power returns, do the following:

1.

Turn

ON

the workstation power switch.

2.

When the Startup window opens, turn the analyzer Operate/Standby switch to

Operate

.

3.

At the Startup window, enter a password.

4.

Select

Re-Start

, then select

OK

.

5.

If possible, repeat the last task prior to the power failure, and verify that any data
generated were stored properly.

6.

If reagents were dispensed, you must perform a weekly Wash 2 before resuming
operation.

To resume operations after power is restored

1.

If the Startup

window is open, select

Shutdown

and perform the normal shutdown

operation.

2.

Turn off the workstation power and turn the Operate/Standby switch

on the analyzer

to

Standby

.

«
...
96
97
98
99
100
...
»

Содержание ADVIA 1800































































































































































































































Отзывы:

Нет отзывов