Siemens ADVIA 1800 Скачать руководство пользователя страница 143

Страница: 143 / 222

Maintenance

143

Remove the bottle.

Empty the remaining contents of the bottle.

Rinse the bottle with deionized water and drain well.

CAUTION

Do not allow the level sensor connector to get wet. This may damage it.

Refill the bottle with cuvette wash solution.

Return the bottle to the same position on the shelf in the cabinet.

Connect the cuvette wash bottle level sensor connector, then push the connector in
and turn it clockwise.

10.

Insert the filter and hose, then fasten the cap.

NOTE:

Make sure that the filter holder is located at the bottom of the bottle.

11.

Return the analyzer to the READY mode.

12.

Prime the fluid lines:

NOTE:

If you are cleaning other bottles, wait to perform this step for all fluid lines.

Return the analyzer to the READY mode.

At the Operation Panel, select the

Prime

button.

At the PRIME Settings dialog box, select

Prime 2

and then type

or more for

the number of times in all fields.

Select

Execute

Cleaning the chiller filter

Materials required:

• Vacuum cleaner

Time: 10 minutes
Analyzer mode: STANDBY

BIOHAZARD

Wear personal protective equipment.
Use universal precautions.

NOTE:

The chiller filter is located on the right inside bottom shelf of the analyzer

cabinet. It must be accessed through the panel door on the right side of the analyzer.

Set the analyzer to Standby.

On the front right side of the analyzer, push and release the panel door to gain access
to the chiller unit.

Locate the filter and slide it out of the analyzer.

Using a vacuum cleaner, remove the dust from the filter.

If the filter requires further cleaning, perform the following steps:

Wash the filter under running water.

Dry the filter before replacing it.

Slide the filter back in place and close the panel on the right side of the cabinet.

Return the analyzer to the READY mode.

Содержание ADVIA 1800































































































































































































































Результаты поиска

Содержание ADVIA 1800

Отзывы:

Siemens ADVIA 1800, Руководство оператора, Страница: 143 / 222

Результаты поиска

Содержание ADVIA 1800

Отзывы: