Siemens ADVIA 1800 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 222

Siemens ADVIA 1800 Скачать руководство пользователя страница 2

2

ADVIA 1800 Operator’s Guide

The ADVIA

®

1800 Chemistry system is for

in vitro

diagnostic use.

The information in this guide was correct at the time of release. However,
Siemens Healthcare Diagnostics continues to improve products and reserves the right to
change specifications, equipment, and maintenance procedures at any time without
notice.

If the system is used in a manner not specified by Siemens, the protection provided by the
equipment may be impaired. Observe all warning and hazard statements.

The ADVIA

Chemistry system is manufactured in Japan for Siemens.

The Universal Rack Handling System is manufactured in Germany for Siemens.

Manufactured in Japan for:

Copyright and trademarks

ADVIA Centaur

and

ADVIA are trademarks of Siemens Healthcare Diagnostics.

Acrobat is a trademark of Adobe Systems Incorporated.

Clorox is a trademark of The Clorox Company.

Windows is a trademark of Microsoft Corporation.

© 2015 Siemens Healthcare Diagnostics Inc. All rights reserved.

No part of this manual or the products it describes may be reproduced by any means or
in any form without prior consent in writing from Siemens.

«
1
2
3
4
...
»

Содержание ADVIA 1800































































































































































































































Отзывы:

Нет отзывов