Siemens ADVIA 1800 Скачать руководство пользователя страница 213

Страница: 213 / 222

Appendix

213

Appendix E – Symbols

Explanations of symbols associated with the ADVIA 1800
system

Warning and caution symbols

These symbols are used for both caution and warning.

WARNING

indicates the risk of personal injury or

loss of life.

CAUTION

indicates the possibility of damage to or

destruction of equipment.

CAUTION

When this symbol appears on the system without
additional information, you must consult the
instructions for use.

This symbol indicates a moving component that can
cause injury.

This symbol alerts you to a potential electrical hazard.

This symbol alerts you to the risk of exposure to
lasers.

The onboard sampler is equipped with a laser barcode
reader. When covers are opened, there is a risk of
radiation exposure. Do not stare into the beam.

This symbol alerts you to a potential biohazard.

Biohazard labels are also placed on the sample and
dilution probes, which are exposed to the sample
during the analysis.

This symbol indicates the presence of a part emitting
high temperature.

Caution -
Laser radiation when open and interlocks defeated. Do not stare into beam

Содержание ADVIA 1800































































































































































































































Результаты поиска

Содержание ADVIA 1800

Отзывы:

Siemens ADVIA 1800, Руководство оператора, Страница: 213 / 222

Результаты поиска

Содержание ADVIA 1800

Отзывы: