Siemens ADVIA 1800 Скачать руководство пользователя страница 148

Страница: 148 / 222

148

ADVIA 1800 Operator’s Guide

Set the analyzer to Standby.

Open the filter cap at the front of the cuvette conditioner bottle (

), and pull up the

tube with the filter.

Disconnect the cuvette conditioner bottle level sensor connector (

Turn the connector counter-clockwise and pull it out.

CAUTION

Make a note of the bottle position on the shelf to avoid mixing up the fluid
bottles.

Remove the bottle.

Empty any remaining contents of the bottle.

Rinse the bottle with deionized water and drain well.

CAUTION

Ensure that the level-sensor connector (

) does not get wet to avoid damaging it.

Refill the bottle with cuvette conditioner.

Return the bottle to the same position on the shelf in the cabinet.

10.

Connect the cuvette-conditioner bottle level sensor connector, then push the
connector in and turn clockwise.

11.

Insert the filter and hose, then fasten the cap.

NOTE:

Make sure that the filter holder is located at the bottom of the bottle.

12.

Prime the fluid lines:

NOTE:

If you are cleaning other bottles, wait to perform this step for all fluid lines.

Return the analyzer to the READY mode.

At the Operation Panel, select

Prime

At the Prime Settings dialog box, select

Prime 2

and type

for the Number of

times in all fields.

Select

Execute

Содержание ADVIA 1800































































































































































































































Результаты поиска

Содержание ADVIA 1800

Отзывы:

Siemens ADVIA 1800, Руководство оператора, Страница: 148 / 222

Результаты поиска

Содержание ADVIA 1800

Отзывы: