Siemens ADVIA 1800 Скачать руководство пользователя страница 153

Страница: 153 / 222

Maintenance

153

Every 4 months maintenance

Cleaning the ancillary reagent bottle filters

Materials required:

• Filters (REF 08602474, PN 073-0033-01)

order one set per bottle

Time: 20 minutes
Analyzer mode: STANDBY

BIOHAZARD

Wear personal protective equipment.
Use universal precautions.

Use this procedure to clean the filters in the following bottles

•

RRV (reaction) bath oil

•

Diluent

•

Cuvette detergent (wash solution)

•

Conditioner

Set the analyzer to Standby.

Open the filter cap at the front of each bottle and pull up the filter hose.

Unfasten the connector at the end of the hose.

NOTE:

If any of the filters are ripped or damaged, replace them with new filters

Remove the filter and inspect it for particles or dirt.

If dirty, clean the filters as follows:

NOTE:

An additional set of filters is included with the analyzer. Locate the spare

filters and place them on the system to avoid downtime while the dirty filters are
cleaned.

Place the filters in a beaker filled with a freshly made 10% solution of household
bleach and water.

After 30 minutes, remove the filters.

Rinse them in deionized water.

Replace them into their respective holders.

NOTE:

Store the clean filters in a clean dry container for later use.

Fasten the connector.

Using a pad soaked in alcohol, clean the outside surfaces of the filter holders and
hoses.

Insert the filter hoses into the bottles, then fasten the caps.

Return the analyzer to the READY mode.

10.

At the Operation Panel, select

Prime

11.

At the Prime Set

dialog box, select

Prime 2

and enter

or more for the number of

times in all fields, and then select

Execute

Содержание ADVIA 1800































































































































































































































Результаты поиска

Содержание ADVIA 1800

Отзывы:

Siemens ADVIA 1800, Руководство оператора, Страница: 153 / 222

Результаты поиска

Содержание ADVIA 1800

Отзывы: