Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 77

Страница: 77 / 80

Clinitek Status Connect System

Operator’s Guide

Term Definition

Help Screen

The screen used to display help information to the
operator.

Icon

An image used to label a control.

Import

To copy data on to the system from a removable data
storage device.

Menu Screen

A software UI screen that displays buttons to the
operator for them to choose from.

Notifications
Message

A message that conveys information about the
system to the user.

Navigation

The act of moving between the screens that comprise
the system user interface.

Navigation Button

A software UI button control that when selected,
brings the operator to a different UI screen.

Parity

A serial communication setting.

Ready

The state when the system is available to perform
tests.

Recall

To access data such as test results stored on the
system.

Restore

The act of copying data back onto a system to
restore it.

Required Entry

A data entry box that must have data entered into it.

Screen

The display area that contains the controls the
operators select when operating the system. The
system software UI comprises many screens.

Screen Title

A text label that typically appears in the upper left
corner of a screen which serves as a label for that
screen.

Select Ready
Screen

The UI screen displayed when the start up is
complete. All software UI navigation begins from this
screen.

Settings Screen

A UI screen which enables the operator to adjust or
configure some aspect of the system.

Supervisor

An operator who as been assigned supervisor access
privileges on the system.

Test Result

Measured reportable values displayed to the operator
at the end of a test sequence.

Test Sequence

A series of software UI screens that guides the
operator through the tasks required to perform a test
on a sample.

Содержание Clinitek Status Connect System

















































































Результаты поиска

Содержание Clinitek Status Connect System

Отзывы:

Бренды по названию

Популярные бренды

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Результаты поиска

Содержание Clinitek Status Connect System

Отзывы:

Бренды по названию

Популярные бренды