manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Поделиться
Скачать
Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 71

minimum, the symbol length can be no greater than 90 mm (3.5 in), including 
quiet zones, and the scanner can be held no more than 75 mm (3 in) away. 

Narrow to Wide Ratio:

 Must be within the specifications for the format being 

used. This is generally 2.0 to 3.0. 

Symbol Length: 

Variable. See 

Narrow Bar Width

 for more information. 

Quiet Zone:

 Minimum of 10 times the narrow bar width at each end of the 

symbol. 

Symbol Height:

 Minimum of 10 mm (0.40 in). 

Total Size of Label:

 May be greater than the size of the symbol to allow for 

printing of human readable information. Printing of the specimen ID number in 
alphanumeric digits is strongly recommended. 

Symbol grade:

 Minimum grade of “C” as defined by ANSI X3.182-1990 

(available from American National Standards Institute, 1430 Broadway, New 
York, NY 10018). 

Wavelength of Light:

 630 nm (visible red LED). 

Bar Code Scanner Maintenance 

 

CAUTION

 

Do not submerge the scanner in water. The scanner’s housing 
is not water-tight. 
Do not use laboratory wipes, because they may scratch the 
window. 
Do not use any type of solvent, other then recommended 
solvents, to clean the scanner. Harsh chemicals can damage 
the finish or the window. 

 

Clean the bar code scanner window whenever it appears dirty or smeared: 

1.  Wipe the scanner window with a soft cloth or facial tissue dampened with 

water, or an ethanol solution.  

2.  If a detergent solution is used, rinse with a soft cloth or facial tissue 

dampened with water only. 

3.  Clean the plastic case in the same manner. 

Clinitek Status Connect System  

71 

Operator’s Guide 

 

Содержание Clinitek Status Connect System

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды