Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Страница: 10 / 80

Clinitek Status Connect System 10 Operator’s Guide
You can connect a USB memory stick, an external printer, an Ethernet device,
and a handheld bar code scanner to the system using the interface
connections.
You can use an optional handheld bar code scanner and/or external keyboard
to enter operator, patient, and cassette and strip information into the system
instead of entering information using keyboard screens.
Network Connectivity
The Clinitek Status connector supports bidirectional communication with an
external LIS and Ethernet or wireless network connectivity. The connector
supports the 802.11b and 802.11g wireless specifications by connecting a
wireless card to the rear USB port. Standard wired connectivity is available
using the supplied Ethernet cable and the RJ45 port. You can also send CSV-
formatted results to an LIS or PC using the serial (RS-232) port on the back of
the connector.
Memory
The analyzer operating system, software, and settings are stored in the
instrument’s onboard, non-volatile, EEPROM memory. You can insert a USB
memory stick into the USB port on the connector to copy configuration
information. You can then insert the USB memory stick into another Clinitek
Status connector and copy the configuration setup to the new system.
NOTE:
You cannot import data from a spreadsheet into the system.