Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Страница: 30 / 80

Clinitek Status Connect System 30 Operator’s Guide
4. To have the instrument determine QC pass or fail, select Instrument .
To have the operator determine QC pass or fail, select Operator .
5. To permit patient tests if the QC test fails, select Yes .
To prevent patient tests if the QC test fails, select No .
6. Select Next .
The QC Settings-Cassette test screen 3 of 3 displays.
NOTE:
If you selected to have the operator determine pass or fail in Step 4
above, Defining QC Cassette Test Controls is not necessary.
Defining QC Cassette Test Controls
To define QC cassette test controls, perform the following steps:
1. To set the number of levels to complete a QC test, select
1 or 2 .
2. For each control set in Step 1, select the corresponding Control Level, 1
or 2 .
For example, if you set 2 controls, you must define Control Level 1 and
Control Level 2.
The Control Level 1-Cassette test screen displays.
3. Select Enter name of control .
The Name of Control screen displays.
4. Enter the name of this control.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
5. Select Enter .
The Control Level 1-Cassette test screen displays.
6. To set the control level as positive, select Positive .
To set the control level as negative, select Negative .
7. Select Done .
The QC Settings-Cassette test screen 3 of 3 displays.
8. If necessary, repeat defining QC cassette test controls for the next control
level.
9. When all QC levels are defined, select Done .
The QC Settings screen displays.
Setting QC Cassette Schedule
To set the QC cassette test schedule, perform the following steps:
1. For QC cassette test, select
Interval .
The QC Settings-Set QC schedule for cassette test screen displays.
2. To schedule QC tests by hours, select the Hours radio button and use the
arrow keys to indicate the number of hours between QC tests.
Go to Step 7.
To schedule QC tests by days, select the
Days radio button and use the
arrow keys to indicate the number of days between QC tests.