manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Поделиться
Скачать
Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 73

Clinitek Status Connect System  

73 

Operator’s Guide 

 

Appendix F: Computer Interface (LIS) 

Overview 

You can connect the Clinitek Status connector to a host computer or 
Laboratory Information System (LIS) using a serial, Ethernet, or wireless 
connection.  

Refer to the 

LIS Specification,

 10378409, for additional information on the 

interface between the system and LIS. Contact your local technical support 
provider for additional information on programs to interface the connector to a 
computer or LIS. 

Connection Specifications 

Serial Connection 

The serial transmission between the system and the host is established 
through the connector’s rear serial port using a serial cable. Refer to the 

Clinitek Status Interface Specification

, 134292, for additional information on 

serial connections. 

Ethernet (Wired) Connection 

The RJ45 port is used for TCP/IP transmission between the system and the 
network. The host listens for connections on the TCP/IP port and accepts the 
connection when the system tries to connect. 

To connect from the Ethernet port to a 10/100BaseT network, use a standard 
straight-through CAT 5 cable. 

Wireless Connection 

The connector supports the 802.11b and 802.11g wireless network 
connectivity specifications. Connect the optional wireless card to the rear USB 
port on the connector for wireless transmission between the system and the 
network. 

Communication Protocols 

The Clinitek Status system can interface with an LIS using either the POCT1A 
or HL7 communication protocols. The POCT1A protocol supports bidirectional 
communication to allow the system to send and receive information from an 

Содержание Clinitek Status Connect System

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды