Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Страница: 50 / 80

Clinitek Status Connect System 50 Operator’s Guide
19. To edit or create the Host port number, select Enter Port number .
The Port number screen displays.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
20. Select Enter .
The Wired Settings screen 4 of 4.
21. Select Done .
The Connectivity screen 2 of 2 displays.
22. Select Done 3 times to return to the Select Ready screen.
Connecting to the LAN, Wireless Settings
Before beginning, ensure a wireless card is connected to the rear USB port.
Refer to
Connecting to the LAN above.
To connect to the LAN using the wireless card, perform the following steps:
1. At the
Connectivity screen 2 of 2, select Wireless connection and select
Edit wireless settings .
The Wireless Settings screen displays.
NOTE:
As needed, consult with your Network Administrator before entering
information.
2. There are four options for the security settings:
•
To bypass security settings, select Disabled .
•
To use WEP, select WEP .
•
To use WPA, select WPA .
•
To use WPA PSK, select WPA PSK .
3. Select Next .
If you selected Disabled , go to Host Setup below, Step 10.
If you selected WEP , go to WEP Security below.
If you selected WPA , go to WPA Security below.
If you selected WPA PSK , go to WPA Security below.
WEP Security
1. There are 4 options to set the authentication settings:
•
To use an open system, select Open system .
•
To use shared key, select Shared key .
•
To use pre-shared key, select Pre-shared key .
•
If you selected Open system , to use IEEE 802.1X specification,
select IEEE 802.1X .
2. Select Next .
3. For WEP encryption, to enter the key, select Enter WEP key .
The Enter WEP key screen displays.
4. Enter the WEP key.
5. Select Enter .