Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 76

Страница: 76 / 80

Clinitek Status Connect System

Operator’s Guide

Software Terms

The following table defines software terms commonly used on the
Clinitek Status Connect system.

Term Definition

Alert Message

A message that conveys information about the
system to the user.

Alphanumeric

Data comprised of alphabetic and numeric
characters.

Audio Alert

Sounds emitted by the system to draw the operator’s
attention to the system.

Cancel

To end a sequence or operation.

Comment

A user-entered notation associated with a test result.

Control

Objects displayed on the software UI that the user
can manipulate. Buttons, checkboxes, and radio
buttons are examples of controls.
Solution containing a known level of analyte(s).

Countdown

A numeric display that indicates the amount of time
left in an operation.

Data Entry

The act of entering data such as a patient or operator
ID into the system.

Data Entry Box

A UI object which displays data that is entered by the
operator.

Diagnostic Screen A UI screen which enables the operator to perform a

system diagnostic test when troubleshooting the
system.

Disabled

The state when a UI control, such as a button, is not
available to be “touched” or “pressed” by an operator;
Deselected option.

Enabled

The state when a software UI control, such as a
button, is available to be “touched” or “pressed” by an
operator; Selected option.

Error

An event that prevents the system from operating as
expected.

Error Code

A number displayed by the system to communicate
the occurrence of an error to the operator.

Export

To copy data from the system to a removable data
storage device.

Help

Information presented to the operator to assist them
with the completion of a task or operation.

Содержание Clinitek Status Connect System

















































































Результаты поиска

Содержание Clinitek Status Connect System

Отзывы:

Бренды по названию

Популярные бренды

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Результаты поиска

Содержание Clinitek Status Connect System

Отзывы:

Бренды по названию

Популярные бренды