Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Страница: 52 / 80

Clinitek Status Connect System 52 Operator’s Guide
The system attempts to connect to a wireless network.
11. If connected, select Next . Go to Host Setup below.
If not connected, The “Network not detected” message displays. Select
OK .
12. Use the arrow keys to select one of the detected wireless networks.
13. Select Connect .
14. If connected, select Next . Go to Host Setup .
If not connected, see your Network Administrator.
Host Setup
1. To edit or create the Host PC name, select Enter PC name .
The PC name screen displays.
2. Enter the PC name and select Enter .
3. To edit or create the Host IP address, select Enter IP address .
The IP address screen displays.
4. Enter the IP address and select Enter .
5. To edit or create the Host port number, select Enter Port number .
The Port number screen displays.
Use the alpha keyboard to enter text.
To enter numeric text, select
123 .
6. Select Enter .
7. When the settings are complete, select Next .
8. To use the POCT1 communication protocol, select POCT1 .
To use the HL7 communication protocol, select HL7 .
NOTE:
If you select POCT1, the Enter Patient Information screen displays
when running a strip test, even in Quick Test mode.
9. Select
Done .
The Connectivity screen 2 of 2 displays.
10. Select Done 3 times to return to the Select Ready screen.
Managing Printout Settings
This section describes how to customize the printed test results. For other
printer settings, refer to the
Clinitek Status Analyzer Operator’s Manual .
Customizing the Printout
You can customize the test results printout by including or excluding:
•
Operator name
•
Patient name
•
Patient ID
•
Instrument serial number
•
Urine color