manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Поделиться
Скачать
Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 13

Clinitek Status Connect System  

13 

Operator’s Guide 

 

numeric keyboards, select either 

A B C

 or 

1 2 3

 at the top left part of the 

screen. When you are done entering information, select 

Enter

 at the bottom. 

Setting Test Mode 

The analyzer allows you to set up patient tests in 3 modes: Quick, Full, or 
Custom. When the analyzer is set to Quick Test, there are no prompts for any 
patient or operator information. In Full Test, there are prompts for operator 
and patient information. Custom Test allows you to set which options are 
prompted and displayed in results. 

Setting the Password 

The analyzer default is to have the password disabled. You can set the 
password through Instrument Settings. One password allows all users who 
know it to modify system settings. The password differs from the Operators ID 
list in that you can permit individual operators to perform patient tests, QC 
tests, recall results, and/or modify system settings. If both the password and 
Operator ID are enabled, the system prompts only for the Operator ID. For 
more information on Operator IDs, refer to 

Managing Operators List

. 

Содержание Clinitek Status Connect System

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды