manualshive.com logo in svg

Siemens Healthcare Clinitek Status Connect System, Руководство оператора

Поделиться
Скачать
Siemens Healthcare Clinitek Status Connect System Скачать руководство пользователя страница 41

6 System 

Configuration

 

Overview 

This section provides detailed installation instructions for the Clinitek Status 
connector. Follow the installation steps carefully to ensure proper installation, 
operation, and service. 

 

CAUTION

 

Do not drop or handle the system roughly, which can disturb 
internal calibrated optics and electronics or cause other damage. 
Always handle the system with care. 

Place the Clinitek Status Connect system where it will avoid extreme 
temperature variations. Avoid proximity to open windows, direct sunlight, 
ovens, hot plates, open burners, radiators, and dry ice baths. Do not place the 
system on the same bench as a source of vibration. Provide bench space 
large enough to allow free air circulation around the system. 

NOTE: 

If you run analyzer software version 1.9 or lower, upgrade the software 

to the latest version. Refer to the software upgrade instructions in the Clinitek 
Status Software Upgrade Kit. 

Record the Warranty Information  

1.  Locate the serial number. 

The instrument serial number is located under the printer cover. The 
connector serial number is on the bottom of the connector. 

2.  Print the Pre-service Checklist, and the 

Warranty Information

 from 

Appendix A. 

3.  Write the installation date and serial number in the spaces provided in the 

Pre-service Checklist, and on the 

Warranty Information

. 

Unpacking 

The Clinitek Status connector is delivered in one shipping carton. 
1.  Carefully remove the contents of the shipping carton. 
2.  Inspect the carton and contents for visible signs of damage. If damage to 

the connector exists, immediately file a complaint with the carrier. 

3.  Ensure all items in the bullet list below are included in the package: 

•

 

Clinitek Status connector 

•

 

2 plastic clips 

Clinitek Status Connect System  

41 

Operator’s Guide 

 

Содержание Clinitek Status Connect System

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды